How to Set Up Orbi RBK853, Update Its Firmware, and Reset It?

The Orbi RBK853 is an AX6000 WiFi mesh system that is capable of delivering 6Gbps and consists of an RBR850 router + 2 RBS850 satellites. It can cover up to 525 square meter of area and you can connect 100+ devices to its network. But, that cannot be done without the setup. Give a thorough read to the sections highlighted ahead to learn about the setup process of the RBK853 mesh system along with the steps to install the latest firmware and steps to reset the mesh system.

Steps to Set Up Orbi RBK853 Mesh System

Walk through the steps given below to learn about the installation process of the Orbi mesh WiFi system.

• Get the Orbi app at orbi-app.com or from the respective app store of your mobile phone.
• After launching the app, you have to create a Netgear account using some important details.
• Select Get Started and scan the QR code available on the Orbi RBR850 router’s sleeve or base.
• Choose the product to be installed i.e. Orbi RBK853.
• Consider choosing the number of satellites too which will be 2. However, if you are planning to add an outdoor satellite and perform Orbi WiFi extender setup for the same, choose 3 instead of 2.
• Restart the modem and connect it to the Obi RBR850 router’s Internet port (Yellow colored port).
• Get back to the Orbi app after switching on the Orbi RBR850 router and RBS850 satellites.
• Connect phone to the RBK853 network using the default SSID and WiFi password of the router.
• Personalize the settings of the Orbi mesh system by following the instructions appearing on the screen.
• Set up security questions after giving an admin password to the Orbi router.
• Lastly, put RBS850 satellites to their permanent locations.

This is how one can set up Orbi RBK853 mesh WiFi system using the Orbi mobile application. Just in case, you have added an Orbi RBS850Y or an RBS40V satellite to the mesh system, ensure to set it up in the Extender mode. They won’t perform up to the mark in Orbi mode (general operating mode of satellites).

How to Update Orbi RBK853 Firmware?

Although the app prompts the user to update the firmware of the mesh system during the setup process, still it is recommended to keep an eye on the rolled out updates after that. The instructions given below will provide instructions to upgrade the Orbi mesh system:

• Connect phone to the Orbi WiFi network.
• Launch the Orbi app and tap Sign In after entering the admin password of the Orbi RBK50 router.
• Tap the Menu icon > Settings > Router Settings.
• Tap Check for Updates.
• Go through the in-app instructions in case a new firmware is available for your Orbi mesh.

How to Reset Orbi RBK853 Mesh System?

Resetting the Orbi mesh system will wipe out all the customized settings. It means the router will no longer work on personalized SSID, WiFi password, admin password, and other settings. This will make it run on the default settings. Here are the steps to reset Orbi mesh system:

• Ensure that the power supply to the Orbi RBK853 device is stable.
• Locate the Reset button at the back.
• Press the button using a paperclip and release it after 10 seconds.

In Conclusion

This is how an Orbi RBK853 mesh system can be configured and reset. This blog also covered the instructions to update the system’s firmware. It is anticipated that the information given here will be able to help you out.