How to Set Up Orbi RBS50 Satellite in Home Network?
Orbi RBS50 is an add-on satellite that can be added to the WiFi network created by an Orbi AC3000 router. In this very blog, you will find information to set up Orbi RBS50 satellite in your home network.
Before You Set Up Orbi RBS50 Satellite
Prior to add the satellite to your home network, we want you to ensure the following:
- You should have completed the Orbi router setup and your router must be broadcasting its WiFi.
- The Netgear Orbi app should be installed on your mobile phone.
- You must have a Netgear account and your Orbi router should be registered there.
Now that you are familiar with the prerequisites of adding the mesh satellite to the home network, we are assuming that you have completed them. Let us straightforward move to the steps that you can use to set up the Orbi RBS50 satellite.
Steps to Set Up Orbi RBS50 Satellite Using Various Methods
Since you are setting up an Orbi add-on satellite, the steps involved will only include syncing the satellite with the router. You can do that either with the help of the Orbi app or attempt to sync your devices manually.
How to Set Up Orbi RBS50 via App?
To install the satellite using the Orbi app, it is recommended to follow the instructions provided below. Know that the app can also be used to complete Orbi WiFi extender setup in case you want to extend the Orbi WiFi outdoors.
- Ensure that the Orbi app version installed on your mobile phone is the latest one.
- Once ensured, launch the app.
- If prompted, complete the login process using the Netgear account details.
- You can also log in with the help of the Orbi router details.
- Tap the Home icon on the dashboard.
- Thereafter, select Add Satellite.
- A few on-screen instructions will appear.
- Follow them to sync or set up the Orbi RBS50 satellite.
How to Set Up Orbi RBS50 Manually Using Sync Button?
Just in case you do not have a mobile phone, you can use the Sync button on your Orbi router and satellite to sync them. If you have an existing satellite, it can also be synced with your new RBS50 satellite. Refer to the points given below to set up the satellite manually:
- Power on your Orbi RBS50 satellite after placing it closer to the Orbi router.
- Once done, you will notice the Ring LED on your satellite pulsing white.
- Let the light go solid white.
- Now, you are required to press the Sync button on the back of your RBS50.
- Locate the Sync button on your Orbi router or the existing satellite now and press it.
- The button on the existing router or satellite must be pressed within 2 minutes.
This will sync the satellite with your Orbi router and it will be added to your home network. Just in case you want to verify whether the setup/sync was successful or not, you need to check out the next section.
Orbi RBS50 Satellite Sync Light Colors
| Color | Meaning and Troubleshooting |
|---|---|
| Blue | Your satellite is synced successfully with the router and the connection between them is also good. |
| Amber | Although your RBS50 satellite and router are successfully synced, the connection between them is fair. For better connection, bring both devices closer. |
| Magenta | The synchronization process between your devices has failed. You are suggested to move the Orbi RBS50 a little closer to the main router and try syncing them again. |
The Conclusion
That’s all about how to sync and set up Orbi RBS50 satellite to the home network. Hopefully, using the information provided above, you will be able to sync your devices successfully.