Constructing a mesh network in your home will surely extend your WiFi range. Orbi mesh system is one of the best mesh networks right now, so we advise for the Orbi router & satellites to extend your WiFi range.
An Orbi router combined with various satellites along with your home modem’s network, it refers to a mesh network that has been established to provide a proper WiFi coverage around your home. The main purpose of the mesh network is solved when router is properly connected with the modem and along with its satellites.
Hence, we will explain you about how to complete this Orbi mesh setup by connecting the router and sync Orbi satellites with it. Let’s dive into the Orbi router setup.
Plug in the satellite about halfway between the Orbi mesh router and your dead zone. Press the Sync button on the satellite and router to make a connection.
The LED ring will pulse white, then magenta, and if all is good, it turns blue (strong connection) or amber (decent, but could be better). But if the device shows red LED? It indicates, no connection, move it closer to the router.
Pro Tip: Don’t place satellites too close or too far from the router. Aim for around 30-40 feet away, max.
You can set it up manually, but the Orbi app makes the Orbi router setup ten times easier.
You can also name your network, set a password, and even create guest access right from the app.
Note: Orbi combines 2.4GHz and 5GHz bands under one name by default, which is actually great for seamless roaming between devices. You don’t need to switch manually among the networks.
If you want to tweak more settings start your computer and type orbilogin.com or orblilogin.net or 192.168.1.1 into your web browser. A login page will appear, here enter the Orbi admin login username and password to access the orbi router login interface.
You will get the access and then you can manage the orbi router and satellite’s settings and features easily.
Hope, you have set your Orbi mesh system using these above given steps. But if you are getting any kind of trouble, use the tips given below:
In this section, you will get to learn major and already use troubleshooting tips and solutions.
That’s a sync issue. Move your satellite closer to the Orbi mesh router and re-sync the router and satellite with the help of the Sync button.
Reboot both the devices and if the internet drops, afterwards reboot the connected modem.
Now let’s learn how you can manage the Orbi mesh system important settings like change the WiFi password, Update the firmware, & change the admin credentials.
To change the Orbi WiFi password, you have to log into the Orbi app or orbilogin.net on your phone or computer. Go into the Wireless Settings > select the SSID tab > enter the new network name and password > click/tab SAVE to apply the new SSID credentials.
There are two ways to update the Orbi firmware one is activating the automatic update from the Orbi app on your phone. The other way is downloading the latest firmware file and install it from the orbilogin.net interface. let’s discuss both of them:
Access the Orbi router setup interface on your computer that is connected with the Orbi network. Use the previous Orbi router login password and log into the device.
Now, select the Administration tab. Enter the new admin password and click SAVE button to apply the new admin credentials.
Constructing a mesh network in your home will surely extend your WiFi range. Orbi mesh system is one of the best mesh networks right now, so we advise for the Orbi router & satellites to extend your WiFi range.
Netgear Orbi network can carry the reach of over 200 feet to another building, but you have to sync at least 4-5 satellite with the Orbi router in your building.
By turning it off and powering it on for once. Or plugging out the Orbi mesh router adapter & plugging it again in the wall socket to reboot the Orbi, which will refresh Orbi network.
It is easy to disconnect Orbi satellites from the Orbi mesh router. Just turn them off. Or you can use the Orbi app to disconnect them.
Of course, you can easily use Orbi router to connect with WiFi internet network. You don’t need any satellite for the connection, but it will not work as the mesh network then.