Orbi RBR750 Satellite Update without Ethernet-Fixes

Users who have RBR750 router and satellites connected with it are facing a unique problem “Orbi RBR750 satellite update without Ethernet cable”. We will share all the possible solutions for this mentioned issue.

Disconnect Ethernet backhaul

Unplug the Ethernet (LAN) cable. The Ethernet line between the router and satellite is what’s forcing it into wired backhaul mode. Pull that out.

Now, the satellite should disconnect with the router. The ring light will probably go amber or magenta (depending on the model). Don’t panic. Give it a minute or two. It should automatically flip back to wireless backhaul. That’s the whole point of Orbi — it’ll use wired if it’s there, wireless if it’s not.

Disable Auto Updates from the App

1. Open the Orbi app (yeah, obvious, but start there).
2. Tap the Menu (the little hamburger icon in the top-left).
3. Go into Settings → Router Settings.
4. Scroll down until you see Firmware Update.
5. By default, there’s usually a box checked that says something like “Auto Update” or “Update router automatically.”
6. Disable that toggle. Off. Done.

If you don’t see that option in the app (happens sometimes depending on the firmware you’re already on), you’ve got two other routes:

• Use the Orbi web interface: open a browser, go to orbilogin.com, log in, then head to Advanced → Administration → Firmware Update. Same deal — there’s a checkbox for auto updates. Uncheck it.
• Block update servers (last resort): some folks literally block Netgear’s update domains in their router settings. That’s the nuclear option, but it stops the constant “your firmware is outdated” popups.

Back Your Configuration Settings Up

Log into the Orbi web interface.

Open a browser. Go to orbilogin.com (or just type the router’s IP if you know it, usually 192.168.1.1). Enter your admin credentials. If you never changed them, it’s probably still admin / password (and yes, change that if you haven’t).

Go to Advanced Settings.

Once you’re in, hit the Advanced tab. Then go down to Orbi login Administration. You’ll see an option called Backup Settings.

Download the backup file.

There’s literally a button that says Back Up. Click it. Your browser will download a .cfg file. That’s your entire router config in one file. Toss it somewhere safe—Dropbox, Google Drive, or even a USB stick.

Restoring later.

If you ever need to put things back, same spot: Administration > Backup Settings > Restore. Upload the file, click restore, and let the router reboot. Done.

Reset If Above Fixes Won’t Work

• First, find the little reset hole on the back of the main Orbi router. Yeah, the paperclip trick. You’ll need something small and pointy.
• Power it on, wait until the lights settle (doesn’t matter what color really, as long as it’s not mid-boot).
• Jam that paperclip into the reset hole and hold it. Like a good 10–15 seconds. Don’t let go too early or it just blinks at you and does nothing.
• Wait until the power LED actually turns amber/orange. That’s when you know it’s wiping.
• Let it reboot. Takes a couple minutes. Don’t freak out if it sits there looking dead for a bit. Then re-do the Orbi router setup

Reconfigure the Orbi Device

1. Once it’s reset, grab your phone and download the Orbi app if you don’t already have it. You can also hit up orbilogin.com in a browser, but honestly the app is easier unless you hate apps. The router will broadcast a default Wi-Fi name (something like “OrbiXX”). Connect to that.
2. Open up the Orbi app. It’ll walk you through like you’ve never set it up before. You’ll create an admin password (this is separate from your Wi-Fi password, don’t mix them up). Then you can rename your Wi-Fi and set the password you actually want.
3. If you’ve got satellites, the app should detect them automatically. If it doesn’t, you can add them manually — just hit the “+” in the app and scan the QR code on the bottom of the satellite.
4. If you’re old school, you can sync them with the little sync button on the back of the router and the satellite. Push both within 2 minutes and they’ll link up.

Conclusion

These above solutions are so much helpful for a lot of users. hopefully, these tips and solutions to fix the Orbi RBR750 Satellite Update without Ethernet issue.