Meaning of Orbi Purple Light and Solutions

The Netgear Orbi mesh system consists of one router and two satellites. In which router connects with modem and satellites syncs with the router wirelessly.

You will also see so many Orbi light colors, which indicates the status of the networking device. It shows blue, orange, mangeta and more others which means different.

Orbi purple light has been also blinks on the Orbi system, which meaning is given below;

Meaning: When you see the purple/pink light on the Orbi router, it means the router has been disconnected to internet. If you are seeing Orbi purple light on the satellite it means the satellite is not connected to the router and hence not connected to the internet as well.

You can easily solve this Orbi purple issue with the help of simple solutions and tips given down here;

Solutions for Orbi Purple Light

Check Hardware Connection

The router to modem connection should be established correctly, because Orbi router will get the signals from modem. The Ethernet cable must be connected tightly and in correct ports (router WAN port and modem LAN port).

Ensure All Cable Are Connected and Not Damaged

The Ethernet cable for connection and power cords must be in good condition and not damaged or cut from anywhere. If you find any damaged on any cable then replace the cable straight away.

Make Sure Satellites Are Connected

Satellites can be connected to the router wirelessly; you just have to power on the router and satellites and press the Sync button. But if the devices are not connected, then you can use the backhaul connection method to link them. It is possible through the Ethernet cable.

Complete Orbi Configuration

You should complete the configuration process by accessing the Orbilogin.net interface and adjust the settings.

• Connect computer/laptop to Orbi.
• Open web browser and search orbilogin.net.
• Enter the username and password.
• Access the interface and configure the settings.

If Orbilogin interface not work, then you can use the Netgear Orbi app.

Reboot Orbi Router and Satellites

Refreshing the router and satellites hardware, settings and clearing the cache, can dispel the Orbi purple light issue. Reboot the router and satellites by turning them off and on once.

Hard Reset Last Option

In very rare cases, user need to factory reset the Orbi device to dispel the issue, but after resetting the device, you have to complete the Orbi router setup again;

• Find the RSEET pinhole button.
• Use pin or sharp object and give it a long press.
• The reset process will start.

The Conclusion

Here, you have seen and learned about Orbi purple light and how you can turn off this issue status light with the help of some solutions.