How to Connect Orbi RBS750 Satellite with Router?

Connecting an Orbi satellite is no challenging task to complete. But, without correct instructions, the connection can be a challenge which is fundamental to Orbi mesh setup. In this link guide, you will get to know about two methods to connect Orbi RBS750 satellite with router.

Orbi RBS750 Setup

In Orbi Satellite hardware, you will get to see three buttons.

• Power button
• Sync button
• Reset pinhole button

For satellite to router syncing, the sync button is given on the back with the ports. Just follow some of the steps given below:

1. Plug your satellites power cord into working electric wall socket.
2. Then press the router’s Sync button once.
3. Within one minute, press the sync button on the satellite once.
4. The router will detect the satellites and connect each other automatically.

Then, you don’t need to use app or interface to the add more satellites with your Orbi router.
One more way to complete the Orbi RBS750 setup is via Orbi app.

Connecting RBS750 Satellite via App

Plug your router and satellites cord into the working wall socket and turn them on. Then, open and access orbi app with the help of MyNetgear account credentials in your phone. After that, follow these steps:

1. Scroll down and tap Add More Satellites.
2. The App will automatically detect your satellites.
3. Then, just choose NEXT button.
4. If the app doesn’t detect satellites, select Try Again option.

Troubleshooting Tips:

Placement of Orbi Satellites

The Orbi satellites are like extenders which expand Orbi network signals throughout your whole home. The placement of the satellites should halfway around the router and dead internet signals. Make sure there is no electronic devices nearby the Orbi devices.

Ethernet Backhaul

The other method of connection than wireless is through Ethernet cable. You can use the Ethernet backhaul connection method to link your Orbi satellites to router. You just need a few pairs of Ethernet cable. One cable pair will connect the router to modem, second will connect the router to satellite, and third will link the second satellite.

Reboot Once in a Month

Rebooting networking system in a month will refresh your device’s settings and hardware. To restart the devices, you just have to press the Power button twice.

Summary

With the help of above given information and instructions, we hope you have completed the Netgear Orbi RBS750 setup. If there is any error you are facing while doing the setup, you can either follow the above guide or contact us for technical assistance.

Frequently Asked Questions