Configuration and Troubleshooting Tips for Orbi RBR50
The Orbi WiFi system regulates high speed WiFi connection to your internet service. Orbi router is mesh system; consist of one router and satellites. The Orbi router connects to your modem and satellites expand the WiFi signals within the premises.
Now we will quickly discuss about Orbi router setup, login, reset, change password, how to add satellite to your Orbi network and other troubleshooting tips.
Orbi Router Setup
Connect Orbi router to the modem with an Ethernet cable. While connecting place them nearby, plug in cable in router WAN port and modem LAN port. Then, link the satellite to the router.
Sync your Orbi RBR50 Satellite
This process varies for satellite comes with your Orbi RBR50WiFi system, or if it is add on satellite. The satellite in the WiFi system is pre-set to automatically sync to the WiFi signal from Orbi router. Just connect it with a power outlet. Blue light of satellite LED depicts the successful sync between the router and the satellite.
Sync on add on satellite
Place the satellite within the signal range of WiFi router. First connect the satellite into the power outlet. Push the sync button on the back of the router. Solid Blue light of satellite LED depicts the successful sync between the router and the satellite.
Login to your router and add satellite to your network
Browse to orbilogin.com from your Orbi network connected mobile or computer. In the login window enter the admin credentials. Select Add Orbi satellite, follow the instructions. Connect the satellite with power outlet. Click Next and then press the Sync button on satellite. Solid Blue light of satellite LED depicts the successful sync between the router and the satellite.
Change Orbi Password
You can change Orbi password in the Settings section of Orbi App. Select wireless then open network tab. You will find WiFi name and password fields, can edit the same and save the respective changes.
Troubleshooting Tips for Orbi RBR50:
To resolve the issues in setting up OrbiRBR50WiFi router, focus on few troubleshooting tips as mentioned:
Update Firmware
If you come across issues like Orbilogin.com Not Working error, out-dated firmware could be the issue. Make sure to update the firmware network via mobile Orbi app. Once firmware updated, you can access orbilogin.com.
Reboot Orbi
You just need to switch off the power supply and disconnect the cable from the devices. This process will rectify the temporary glitches and other minor technical issues. Now try accessing orbilogin.com again!
Reset Orbi
There is a Reset button provided at the back of the Orbi WiFi router. You need to press and hold it for at least 30 seconds. All the data and settings will be deleted once you reset the device. You need to reinstall your Orbi WiFi system.
Flashing White Light
When the Orbi WiFi router is undergoing the process of booting, it starts flashing white light. If this issue persist for a longer duration, you should contact the support team for addressing it.
Device Placement
Orbi satellite device plays a very important role in amplifying network coverage. If issues like Orbi Satellite Not Found show up, then you have to cross the device placement. Logically satellite should be placed within 30 feet from the router and away from all other electronic gadgets.
Hope the inputs given above will help you to overcome the common issues with the device!!