Setup Orbi RBR50 Router with Update and Tips

The newest Orbi RBR50 router is out in the market, which you can purchase from Offline stores and online platforms. Here, we will provide setup information about Orbi RBR50 router that includes connection, configuration, update and password change. You will also learn about how to solve problems like Orbi satellite not found or orbilogin.com not working with the help of solutions.

Setup Orbi RBR50 Router

You have to connect the router with the ISP connected modem with the co-axial cable. To connect the router to the modem, you have to use the Ethernet cable, have a look at some instructions to do it;

• Place router near to the modem.
• Connect one end to the modem LAN port.
• Connect other end to the router WAN port.
• Then turn it on by inserting its power adaptor to wall socket.

Now, if you have any Orbi satellite, then you can connect it to the router without using any cable or wire.

Connect Satellites (If You Have)

To connect satellites, you have to place the satellites on the desired locations in your home. Have a look how to do it;

• You have to power on the satellite in your house.
• Then press the Sync button on the Orbi router.
• Within two minutes, you have to press Sync button on the Orbi satellite.

Both the devices will connect each other automatically. After that, you can start the Orbi web interface configuration, which you can do with the help of your computer or phone.

Finish Orbi Router Setup via Computer

You have to connect your computer/laptop to the Orbi network via LAN or SSID details. Then follow simple instructions;

• Go into the web browser.
• Enter URL Orbilogin.net or IP 192.168.1.1.
• Search by pressing the Enter button.
• You will reach to the Login interface page.
• Here enter the username and password. (Given on the label or in user manual).
• You will get to the interface dashboard.

Here, you can manage and configure all the Orbi settings easily.

Finish Orbi Router Setup via Phone

You have to connect your phone to the Orbi network via SSID details and download the Netgear Orbi app;

• Go in to the Play Store or App Store app in your phone.
• Download and install the Netgear Orbi app.
• Open/launch the app and enter admin username and password. (Given on the label or in user manual).
• Reach to the app dashboard, and here you can manage all the settings of the Netgear Orbi RBR50 router.

Now, you should be able to change the password of network after completing the Orbi router setup.

Orbi Router Firmware Update and Password Change

There are few steps to change the newly set up Orbi router password and update its firmware easily.

Firmware Update

Access the Orbi interface> open Advanced Settings> select the Firmware tab> Download and install latest version of firmware> then reboot the Orbi network and enjoy new update.

WiFi Password Change

Access the app or web GUI of Orbi> Go in to the Wireless Settings> enter the new password and username> Save the changes.

You must also learn some of the troubleshooting tips that can solve technical errors like Orbi satellite not found or orbilogin.com not working.

Tips and Solutions

Restart Orbi Device

There are two methods to reboot the Orbi router RBR50;

• Find the power button on the router and press it twice.
• Plug out the power adapter of router and plug it in again in the wall socket.

Reset Orbi Device

By resetting the Orbi device, all the settings of the router will cleared out and you have to configure the network again.

• Find reset button on the router.
• Press and hold it for 10 seconds and release it.
• The reset process will start.

So, here we end the blog post, where you have learned all about the Orbi RBR50 setup and how to configure it easily.