Reasons and Solutions of Orbi Solid Pink Light

There are a lot of colors that Orbi router and satellites shows on the front which indicates its status. But here, we will discuss about the Orbi solid pink light color. First, let’s see what it means;

Meaning:

• When Orbi Router shows solid pink color it means it is not getting the internet from modem or cannot find the IP address.
• When Orbi Satellites are showing the pink color/ magenta light it means it is unable to get the WiFi signals from the router and can’t find its IP address.

Reasons Orbi Solid Pink Light

• Placement or plugging your Orbi router and satellites will be an important part of the setup. If it is plugged in the socket where electronic devices are nearby, then you will face troubles.
• The pink light will not go off if the Orbi network is connecting too many internet devices (above the limit).
• The router disconnection issues will also be a reason why your Orbi solid pink light/magenta light is showing on the device.
• The Ethernet cable is use to connect the Orbi router to the modem to receive and send internet signals. If it damaged then you will face the internet and connection problems.

Solutions Orbi Solid Pink Light

Place Orbi Devices to Optimal Location

The solution to this Orbi solid pink light problem is to make sure that the router and satellites location or spot is optimal. You should make sure that there is no electronic device near to the networking devices.

Make Sure Ethernet Cable is Not Damaged

You must check that the Orbi router is receiving the internet signals or it is even connected to the modem or ISP server socket. The connection of the router to modem will be with Ethernet cable, so make sure the cable is in good condition.

Stable Power Supply

The power supply to the Orbi router and satellite must be good and stable. Make sure that the electric wall socket is in good condition. If it is damaged then fix the wall socket first.

Update Orbi Firmware Version

You should update the Orbi on regular basis. You can do it with Netgear Orbi app as well as orbilogin.net.

Via App

• Connect phone with Orbi network.
• Open Orbi app and log in to it.
• Go to Settings and open Firmware tab.
• Simply Update the Orbi firmware.

Via URL

• Connect computer with Orbi network.
• Open browser and reach to login page by searching orbilogin.net.
• Log in to the interface and go to Settings> Firmware> search new update.
• Start the update by clicking Install button.

Reboot Orbi Device

The most trusting fix for the mentioned problem is rebooting the Orbi device with the help of below given instructions;

• The first way to reboot the device is plug out the power cord of the Orbi router and plugs it in to the electric wall socket.
• The second way to restart the router is pressing the power button twice given on the router device front.

After that, you have to start the Orbi router setup using the app or the computer again to adjust the settings.

In Conclusion

Here, you have seen and learned about the meaning, reasons and solutions of Orbi solid pink light. You can use the solutions to turn it off.